Nikkolor Marmura

Marmura microcement is an innovative, one-component, ready-to-use paste applied in just two layers, creating an authentic marble ceramic effect with the total absence of joints, allowing you to obtain continuous solutions between the floor and the wall.

Available in two sizes:

• 2.5 litres plus 0.7 kg crystal microspheres - covers 7 m² / 2 coats
• 7 litres plus 2.1kg crystal microspheres - covers 20 m² / 2 coats

Coverage: Approximately 800 grams / 1 square metre (two coats)

Soft and easy to use, Marmura can be applied on floors, walls and ceilings, as well as both interior and exterior surfaces such as bathrooms and showers, saunas, kitchens, furniture, swimming pools, balconies and terraces.

This high performing microcement excels in hardness, flexibility, tensile strength and compression, and  is reinforced with ceramic microspheres, nano fibres and micro resins. Thanks to the absence of epoxy resins, Marmura has a total absence of yellowing.

Marmura is resistant to mould, algae and bacteria, environmentally sustainable with a very low VOC content.

Marmura microcement is a coating with very low thickness and with good performance in terms of yield, mechanical strength, and can be applied to both new screeds and old existing hard floors.

This material is supplied with the base material and crystal microspheres packed separately which, when combined, provide a more even finish. This is to prevent the microspheres settling at the bottom of the tub.

Marmura microcement can be coloured with pigments from Nikkolor or Giorgio Graesan.

For best results, use Primer NK as a primer or use Primer Beton as a primer/filler before using Marmura.

Apply Cream Wax or Velatura Siloxane after using Marmura. For additional surface protection, use Protekto Ecosilan.

 To seal and make waterproof, apply Decor Finish after using Marmura.  Please see the Technical Sheet below for more details.

Marmura Brochure

Nikkolor Innovative Surfaces Brochure

Watch the Marmura application video

Technical Sheet including application methods

Material Safety Data

Code 09.00